In the heart of Emirati culture, the kandura is a symbol of tradition, grace, and heritage. This flowing white robe, worn by Emirati men, is more than just clothing; it represents a rich legacy. To keep your kandura looking its best, it’s important to know how to iron it properly. In this blog post, we will provide you with guidance on the best methods for ironing your kandura; keeping it in excellent condition.
Much like laundry, ironing is a chore you either love or hate; there is no in-between. Regardless, it’s a chore that needs to be done with care and patience because if done correctly, ironing adds a smooth and cool look to your clothes. However, there are also ironing mistakes that need to be avoided.
Here are 4 common ironing mistakes!
Not checking the temperature is one of the most common ironing mistakes. With the right setting and temperature, you’ll get the clean results you want.
If you have made this ironing mistake, you’ll know that choosing the incorrect temperature setting can ruin the smoothness of the fabric. Also, it can cause marks and burns on your clothes!
Always read the labels and iron for a good, smoother, and fresher result to save you time and stress!
Drying clothes is part and parcel of cleaning clothes, but ironing dried clothes tends to be on the list of ironing mistakes. Dried clothes lack moisture and consequently, the wrinkles are far more stubborn when they are left on dry clothes, which could damage your fabrics in the long run.
That’s not to say you should be ironing wet clothes but ideally, you should aim for damp clothes because they’ll have enough moisture. Ironing damp clothes makes it easy to reshape and remove creases. Always spray water on dried clothes to dampen them for better results!
When you think about ironing chores, it’s easy to overlook your iron board’s condition. Iron boards are no different to clothesline in your garden; if they’re in good shape, your clothes will be in good shape. If you neglect cleaning duties for your iron board, chances are your clothes may catch some dust and dirt.
We advise you to first store your iron board in a room with a lot of space and every month, clean and wipe it with a cloth!
When it comes to ironing, the organisation is the key to a fresher result. Managing a big laundry pile is the difference between good and bad ironing. Always make a habit of ironing the clothes with the lowest heat setting first.
Generally, heating the iron up is easier than cooling it down. The most common materials that need the lowest temperature are polyester and silk. Once you are done with this, change the settings on your iron to medium and high for the relevant materials.
Ironing mistakes are common and don’t feel too disappointed if you have made these mistakes in the past. Ironing clothes does require time and patience.
If you’re looking for a service that launders and irons your clothes, get in touch with Laundryheap to book a service!
Visit Laundryheap’s website or download the free Laundryheap app on iOS or Android!
Ironing can sometimes feel like a daunting task. If not done properly, you could end up damaging your clothing, sometimes beyond repair. Here are our top tips for successfully getting through your ironing.
Before you begin ironing, it’s important to first adjust the height of your ironing board. Depending on how much clothing you have to iron, you could be stood at your board for a while. Having your board too low can cause back and neck pain, so you want to make sure that it’s at a comfortable height for you.
After you have adjusted your ironing board, you need to make sure that your iron is clean. To clean your iron, begin by mixing a paste of 1 tablespoon of water and 2 tablespoons of baking soda. Apply this paste to the plate of your iron, firstly making sure that it is turned off and cool before doing so. Wipe off your paste with a damp cloth. Next, dip a cotton bud in distilled water and clean your irons steam vents. Pour out any stagnant water in your iron, and re-fill the reservoir one-third full with distilled water. Turn your iron to its highest setting and steam a clean cloth for a few minutes. This will allow the water to flush out the vents of your iron. Finally, pour out any remaining water.
Before ironing your clothing, it’s important that you check each garment’s care label to evaluate what heat setting is necessary for each individual item. Once you have checked all your garments’ care labels, you can organise them by heat setting. Begin with the delicate, low heat, items as these will be the trickiest to iron, before moving on to the medium and high heat items. It’s much faster for an iron to heat up than cool down, so avoid ironing your high heat clothing first.
If you live in a hard-water area, it’s best to boil your iron water before use. Hard-water can cause blockages in your iron, which can reduce its efficiency. You may also notice that if you don’t pre-boil your iron water your clothing may end up stained.
The average ironing board is 54 inches long, so make use of the entire length of it. If you are ironing longer items, iron them vertically down the length of the board to avoid constantly rotating your garment. If you have creases near the armholes of your t-shirts, you can use the slimmer end of your ironing board to place the top of your t-shirt over the board and gently stretch out the creases to iron over them.
It’s always best to iron your clothing inside out, especially if your garment is a darker colour. You may notice when you don’t turn your clothing inside out, that your garments are left with a sheen or iron marks. This is due to the heat from the iron. To avoid these marks, always make sure to turn your clothing inside out before you begin ironing.
It’s important to avoid ironing over decorative items on your clothing, such as sequins, embellishments, and fastenings. Not only is it unnecessary to iron over these decorative items, but it could also cause damage to your iron and/or clothing to do so. Simply iron around these items whenever possible.
Sometimes the heat from your iron is not enough to eliminate the creases in your clothing. When this is the case, you can make a DIY spray. To make your DIY spray, mix equal parts of white vinegar and water, and pour your mixture into a spray bottle. Have this mixture on hand for when you have to deal with those harsher creases.
If you are ironing a cotton item, it’s best to do so before your garment is completely dry. Creases in cotton can be extremely hard to get out, so, for the best result, iron your item whilst it is damp. The heat from the iron will create steam when it comes into contact with the damp material of your garment, making creases easier to fall out.
Have a selection of coat hangers readily available to hang up your clothing immediately after you’ve ironed each item. You have taken the time to carefully iron each item, so you don’t want to risk creasing your garment again. If your items need to be folded rather than hung up, fold these items on a flat surface immediately after ironing, and place them away from anything that may crease or stain them.
You may not always have the time for ironing, and, for those days, Laundryheap is here to help. We will pick-up your ironing, iron all of your items, and re-deliver them to you, within 24 hours.
To book your Laundryheap order, simply head to the Laundryheap website, or download the free Laundryheap app.
